歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-常見問題

常見問題

超聲波清洗機中換能器怎么判斷是好是壞？

作者：admin來源：http://www.heqingliang.cn/時間：2021-02-10

超聲波清洗機的傳感器是超聲波產品的核心，機電設備尤為重要。它將電箱的高頻和高壓電源轉換為高頻機械振動，功率輸出可達數千瓦。因此，其穩定性和功率輸出對整機的運行性能非常重要，也是設備中有價值的部分。整個設備價值的關鍵。

The sensor of ultrasonic cleaning machine is the core of ultrasonic products, and electromechanical equipment is particularly important. It converts the high-frequency and high-voltage power supply of the electric box into high-frequency mechanical vibration, and the power output can reach several kilowatts. Therefore, its stability and power output are very important to the operation performance of the whole machine, and they are also valuable parts of the equipment. The value of the whole equipment is the key.

1.可以從超聲波清洗器的制造過程和外觀中識別出來;它直接反映了公司對產品質量的重視，具有良好技術和外觀的產品質量自然會更好。而且，設計過程直接影響產品質量。

It can be identified from the manufacturing process and appearance of the ultrasonic cleaner; it directly reflects the company's attention to product quality, and the product with good technology and appearance will naturally have better quality. Moreover, the design process directly affects the product quality.

2.可根據超聲波清洗機的工藝設計和材料進行識別，但需要對換能器材料有較好的了解和豐富的經驗。設計是否合理取決于材料的選擇。材料的質量直接影響產品的質量。光版復制不一定可行。不同于相同規格材料的來源，質量也有很大差異。

2. It can be identified according to the process design and material of the ultrasonic cleaning machine, but it needs to have a good understanding and rich experience of the material of the energy exchanger. Whether the design is reasonable or not depends on the choice of materials. The quality of materials directly affects the quality of products. Optical copy is not necessarily feasible. Different from the sources of materials of the same specifications, the quality also varies greatly.

3.參數檢測;檢測傳感器參數是否與電箱參數匹配，是否能達到理想效果。

3. Parameter detection: to detect whether the sensor parameters match the electrical box parameters and whether the ideal effect can be achieved.

4.車載測試：

4. On board test:

（1）功率輸出測試;它可以檢測傳感器與電箱之間的匹配，并能反映電箱輸出功率和傳感器負載。模帶的工作效果越大，功率輸出越好。

(1) Power output test: it can detect the matching between the sensor and the electric box, and can reflect the output power of the electric box and the load of the sensor. The greater the working effect of the tape, the better the power output.

（2）穩定性試驗（模擬老化試驗）;具有額定負載的測試箱和傳感器的功率輸出穩定性。

(2) Stability test (simulated aging test); power output stability of test box and sensor with rated load.

（3）過載運行試驗;測試產品質量的穩定性和壽命。該測試僅需要在額定負載下連續運行8小時。目前，沒有這樣的東西（我公司除外）。

(3) Overload operation test; test the stability and life of product quality. The test only needs to run continuously for 8 hours under rated load. At present, there is no such thing in China (except our company).

由于我們的產品質量差，我們經不起考驗。測試在不到幾十分鐘內報廢。但它仍可用于塑料焊接機約一年。自產品改進以來，該測試公司增加了產品。

Because of the poor quality of our products, we can't stand the test. The test was scrapped in less than a few minutes. But it can still be used in plastic welding machines for about a year. Since product improvement, the testing company has added products.

它直接反映了傳感器的穩定性和壽命。因此，可以根據測試結果改進產品質量。在塑料焊接機上，可以承受此測試的傳感器的短使用壽命可達五年以上。在超聲波清洗機產品之前，只有美國產品才能達到它。

It directly reflects the stability and life of the sensor. Therefore, the product quality can be improved according to the test results. On the plastic welding machine, the shortest service life of the sensor that can withstand this test can reach more than five years. Before the ultrasonic cleaning machine products, only American products can achieve it.

上一篇：超聲波清洗機制作原理，主要結構都有哪些?
下一篇：噴絲板怎么清洗？了解一下超聲波清洗機