在使用低溫廢水回收設備的過程中難免會發生磨損的情況，如果磨損嚴重的話很有可能會對設備的使用年限有影響，那為什么設備會發生磨損呢？下面小編為您解答。

Wear is inevitable in the process of using low-temperature wastewater recovery equipment. If the wear is serious, it is likely to have an impact on the service life of the equipment. Why does the equipment wear? The following section will answer your question.

1、情況多是由于機器的連接處，連接或固定的過于緊密，滑潤度不夠，這個時候設備有可能發生損壞，所以我們需要定時檢查分析設備磨損的原因，及時解決磨損問題，解決磨損的來源，避免磨損造成設備損壞影響使用。

1. In many cases, the connection or fixation of the machine is too tight, and the lubrication is not enough. At this time, the equipment may be damaged. Therefore, we need to regularly check and analyze the causes of equipment wear, solve the wear problem in time, and solve the source of wear, so as to avoid equipment damage caused by wear affecting the use.

2、情況是由于低溫廢水回收設備表面受到環境條件的影響，及一些雨水等液體的腐蝕，設備表面產生銹跡或者腐蝕情況發生的磨損，這種磨損雖然屬于天災不可避免，但我們可以定時檢查設備，及時清理設備上的雜質，力求把磨損程度降低。

2. This is due to the impact of environmental conditions on the surface of the low-temperature wastewater recovery equipment, and the corrosion of some rainwater and other liquids, and the rust on the surface of the equipment or the wear caused by corrosion. Although this wear is inevitable due to natural disasters, we can regularly check the equipment and timely clean up the impurities on the equipment to reduce the wear.

3、磨損就是低溫廢水回收設備在使用過程中由于操作人員使用不當或方法錯誤造成的磨損，還有設備設計不合理也有可能發生磨損，這就需要業主熟練設備使用方法以及在購買設備時候進行運行調試，可防止此類磨損的發生。

3. Wear refers to the wear of low-temperature wastewater recovery equipment caused by improper use or wrong method by the operator during use, and the equipment may also be worn due to unreasonable design, which requires the owner to be proficient in the use of equipment and conduct operation commissioning when purchasing equipment to prevent such wear.

維護以及保養:

Maintenance:

1.設備的維護人員在進行工作之前需要根據技術培訓以及一些實踐應用，在取得合格證之后才可以進入到崗位中進行工作，維護人員在使用設備之前需要了解它的處理工藝以及設備結構，設備操作方法以及技能指標等，需要掌握機電工程設備的維修方法；

1. Before working, the maintenance personnel of the equipment shall, according to the technical training and some practical applications, enter the post to work after obtaining the qualification certificate. Before using the equipment, the maintenance personnel shall understand its treatment process and equipment structure, equipment operation methods and professional skill indicators, and master the maintenance methods of electromechanical engineering equipment;

2.維護的人員應該按時去檢查設備放置的建筑，設備以及電源等組件的應用情況，設備在運行的過程中不可以滲水，漏油以及漏氣等現象發生，需要根據使用的時間添加潤滑油或者是潤滑劑。

2. The maintenance personnel should check the application of the buildings, equipment, power supply and other components where the equipment is placed on time. During the operation of the equipment, there should be no water seepage, oil leakage, air leakage and other phenomena, and lubricating oil or lubricant should be added according to the time of use.

3.在維護各種廢水處理設備時，需要根據設備所規定的方法進行維修，具有油性物質的污染物不可以進入到設備中

3. During the maintenance of various wastewater treatment equipment, maintenance shall be carried out according to the methods specified by the equipment, and pollutants with oily substances shall not enter the equipment

5.低溫廢水回收設備處理需要日常的維護保養之外，還需要根據不同的使用時間對設備進行不同規模的修理。更多注意事項就來我們網站www.heqingliang.cn咨詢吧！

5. The treatment of low-temperature wastewater recovery equipment requires not only routine maintenance, but also different scale repair according to different service time. For more information, please visit our website www.heqingliang.cn!