機器在使用一段時間后，會出現各種各樣的問題，超聲波清洗機也是如此，那么，它的常見故障有哪些呢？下面小編來為大家總結一下。

After using the machine for a period of time, there will be various problems, including the ultrasonic cleaner. What are its common faults? Let's summarize for you.

1、保險盒損壞

1. Fuse box damaged

這類故障是比較常見的，如果在開機后發現沒有電源顯示，也沒有動作開始，我們首先要檢查一下電源座的保險盒是否損壞了，如果損壞有可能是地線和火線混用沒有接地。

This kind of fault is quite common. If there is no power display and no action is started after starting the machine, we should first check whether the fuse box of the power supply holder is damaged. If it is damaged, it may be that the ground wire and live wire are mixed and not grounded.

2、換能器故障

2. Transducer failure

這是機器在長時間使用之后容易產生的問題，因?yàn)槭褂玫臓顟B(tài)下機器溫度會慢慢上升，可以使用搖表測量來檢測是否是換能器出現故障。

This is a problem that is easy to occur after the machine is used for a long time, because the temperature of the machine will rise slowly when it is used. You can use a megger to measure whether the transducer is faulty.

3、穩壓管故障

3. Stabilizer tube failure

超聲波清洗機的穩壓管故障一般是由于短路或者是功率管組比較小，然后同時開機造成的，本身該穩壓管是不會出現故障的。

The voltage stabilizing tube failure of ultrasonic cleaning machine is generally caused by short circuit or small power tube group, and then the machine is started at the same time. The voltage stabilizing tube itself will not fail.

超聲波清洗機在使用的過程中可能會遇到一些問題，而這是所有設備在使用過程中都可能會遇到的，這就需要做出及時的診斷。

The ultrasonic cleaning machine may encounter some problems in the process of use, which are likely to be encountered by all equipment in the process of use, which requires timely diagnosis.

如果問題是不能自己解決的，那就須要找相關的維修人員進行維修，但對于一些基本的常見問題我們可以做出及時的解決，從而保持其正常的工作。

If the problem cannot be solved by ourselves, we need to find the relevant maintenance personnel to repair it, but we can solve some basic common problems in a timely manner to maintain its normal work.

總之，超聲波清洗機發生問題首先就是進行自檢，一些小問題及時的解決即可，也要做好日常的保養工作延長使用壽命。

In a word, the first thing that happens to the ultrasonic cleaner is self inspection. Some small problems can be solved in time, and routine maintenance should also be done to extend the service life.

以上就是超聲波清洗機的常見故障，機器產生的問題，還有其他方面，需要具體問題具體分析。更多相關內容就來我們網站www.heqingliang.cn進行咨詢吧。

The above are the common failures of the ultrasonic cleaner, the problems caused by the machine, and other aspects, which need specific analysis. For more information, please visit our website www.heqingliang.cn.