使用噴淋清洗機對石材的加工具有非常重要的意義，這些意義其具體的表現主要在以下這些方面：我們利用噴淋清洗機進行高壓磨料水射流切割技術可以形成對石材工件的切割作用，這個切割作用的具體表現主要體現在這三點:

The use of spray cleaning machine is of great significance to the processing of stone. The specific performance of the significance is mainly in the following aspects: we can use the spray cleaning machine to cut the high-pressure abrasive water jet cutting technology to form the cutting effect on the stone workpiece. The specific performance of this cutting function is mainly reflected in the following three aspects:

一是磨料對工件表面的微加工作用。

One is the micro machining effect of abrasive on workpiece surface.

二是，固體磨料的沖蝕作用。

Second, the erosion effect of solid abrasive.

三是，帶磨料的高壓水射流對工件的剪切作用。這些作用的具體運用對石材的加工是具有非常重要的意義。

The third is the shear effect of high pressure water jet with abrasive on the workpiece. The concrete application of these functions is of great significance to the processing of stone.

石材的拼花工序是由多種圖形組成才能完成的一種藝術，在一些精細曲線的加工上更是如此，假如我們采用傳統的線鋸、帶鋸、手工，是很難順利完成上述任務的，即使加工出來，也不會很理想，其明顯的不足就是——曲線之間的吻合度不夠。此時此刻，假如我們使用高壓清洗機來進行加工石材異型件，這些難題就會迎刃而解。

The mosaic process of stone is an art that can be completed by a variety of graphics, especially in the processing of some fine curves. If we use the traditional wire saw, band saw and manual work, it is difficult to successfully complete the above tasks. Even if it is processed, it will not be ideal. Its obvious deficiency is that the coincidence degree between the curves is not enough. At this moment, if we use high-pressure cleaning machine to process stone shaped parts, these problems will be solved easily.

噴淋清洗機廠家告訴您：一般來說，石材的拼花或異型圖案是通過軟件制成后，由掃描儀輸入計算機，經過計算機編排后，輸送給噴淋清洗機來進行高壓磨料水射流具體的切割工作。在具體的加工過程中，我們可以根據噴淋清洗機的主要技術參數，不同設計對應著不同的參數，從而對石材進行具體的加工程序。

Spray cleaning machine manufacturers tell you: Generally speaking, stone mosaic or special-shaped patterns are made by software, input by the scanner into the computer, after the computer arrangement, it is sent to the high-pressure cleaning machine to carry out the specific cutting work of high-pressure abrasive water jet. In the specific processing process, we can according to the main technical parameters of spray cleaning machine, different design corresponding to different parameters, so as to carry out specific processing procedures for stone.